7200 Specifications and Dimensions

Specifications

Parameter	Value
Linear Range	2.0 mm (80 mils). Linear range begins at 0.38 mm (15 mils) from target and is from 0.38 to 2.41 mm (15 to 95 mils)
Incremental Scale Factor (ISF)	7.87 V/mm (200 mV/mil) +/-4% error when measured in 10 mil increments when calibrated as a system. Error is 9.5% including interchangeability error when measured in increments of 0.25 mm (10 mils) over the 2.0 mm (80 mils) linear range
Deviation from best fit straight line (DSL)	Less than ±0.06 mm (± 2.3 mils).
Frequency response	0 to 10kHz (-3 dB) typical, with up to 100 meters (300 feet) of field wiring.
Target Size	Minimum: 24 mm (1.0 in) diameter.
Probe Tip Material	Polyphenylene sulfide (PPS).
Probe Cable Specifications	75 Ω coaxial, fluoroethylene propylene (FEP) insulated probe cable in the following total probe lengths: 0.5, 1, 5, or 9 meters
Probe Case Material	AISI 304 stainless steel (SST)
Extension Cable Material	75 Ω coaxial, fluoroethylene propylene (FEP) insulated.
System Length	5 or 7 meters including extension cable
Extension Cable Armor (optional)	Flexible AISI 302 SST with/without FEP outer jacket.
Tensile Strength (maximum rated)	220 N (50 lb) probe case to probe lead. 220 N (50 lb) at probe lead to extension cable connectors. 220 N (50 lb) probe case to stainless steel armor
Connector material	Gold-plated brass
Recommended Connector Torque	Hand tightened
Maximum torque	0.56 N• m (5 in• lb)
Minimum bend Radius (with or without SS armor)	25.4 mm (1.0 in)
Probe Temperature Range Operating Temperature	-34°C to +125°C (-30°F to +257°F)
Storage Temperature	-51°C to +125°C (-60°F to +257°F)
Extension Cable Operating and Storage Temperature	-51°C to +177°C (-60°F to +351°F)
Relative Humidity	100% condensing, non-submersible when connectors are protected